Open the bag, remove the main frame, expand it, lock the stage floor sections into place,
insert the main pole, tighten retaining screw, add the extension pole ……… and your ready to dance – it’s that quick and simple.
So less than 5 minutes from bag to dancing and even better, the only tool you need is a hex key and that’s supplied!

X-Stage - Key Features

Circular stage 1600mm (5’3”) diameter – not square with corners and flat sides reducing the overall dance area – dancers go round a pole don't they?? And 1600mm is the ideal size.

Rounded stage edge – so no sharp edges to hurt the dancer during moves or floor work.

Fully foldable – main frame folds into a 900x350x200mm bag with wheels. So 2 complete X-Stages will fit in a standard car.

Stage Floor Panels – 6 easy to fit panels that just lock into place (no tools needed). Supplied in 3 carry bags for storage and transportation. (The panels shown in the pictures are without floor covering).

Pole Tube – there is a 50mm x 1500mm (1.98” X 60”) lower main pole section, then an extension is added to suit the height of your room. Not a one piece, cut to length, difficult to transport pole tube which has to be totally changed for different height rooms.

Static and Spinning – Spinning is included as standard at no extra cost – it is not an optional extra!! As with all X-Poles a simple tightening of 2 screws locks or unlocks the pole to change mode from static to spinning. Using extra large industrial bearings the spinning mode is astoundingly smooth and free.

Stability – extremely stable even with no additional weight. All moves spins and inverts can be done without weight as standard, only extreme moves which use heavy side loads may need additional weight.

Extension Stabilisers – these extend the frame diameter profile to 2.4m overall increasing stability without the need for weight.

Weight Posts – allow for the quick addition of easy to carry bar bell weights if needed.

Adjustable Feet – screw in or out to take out any floor undulations and reduce movement.

Silicone Pads – purpose designed silicone frame pads stop the stage sliding and protect the floor from damage.

Side covers – comes with wrap round side covers. These can be supplied as an option in Plain Black for personal artwork/customization.

Wheeled Carry Case – to take the hassle out of moving the main frame from the car to the venue X-STAGE comes with a wheeled carry case. The stage panels also are supplied in carry cases as are the pole sections.